Bin-Flo

Low Pressure Aerator

By introducing low pressure air into dry material the material can flow easier in hoppers or chutes with a bin aerator; available with cotton or fiberglass diffuser. Bindicator experts can help design a complete aeration solution.

Non-Clogging Diffusers & Integral Orifice

The aerator diffuser provides equal distribution of air and will not clog with even the finest materials. The orifice is able to control the air consumption at any recommended pressure.

Technology: Aerator
Applications: Introduces low pressure air into any dry, finely ground material

More Features

Simple Installation

Can be installed from the inside or the outside of a bin or vessel. Depending on the size of the hopper, multiple units will be installed for maximum efficiency.

Size and Pressure Options

Choose between 6 or 12 inch width and air consumption per Bin-Flo unit is from 0.5 to 5 PSIG can be used; 3 PSIG is recommended and used in most applications.

Specifications

  • Diffuser Cotton (Canvas): Up to 180º F (82º C); Fiberglass: Up to 600º F (316º C)
  • Diffuser Frame: Galvanized Steel 16 mesh or 316 Stainless Steel mesh
  • Body: Zinc plated steel or stainless steel
  • Dimensions L Series: 3.75 x 7.5 in. (9.5 x 19 cm); LL Series: 6 x 12 in. (15 x 30 cm)

Support

Drawings

Title Language | Revision
Bin-Flo® Aerator Dimensional Drawing
Download 2D/3D Drawings

Documents

Title Language | Revision
Bin-Flo® Aerator Installation & Operation Manual
Bin-Flo® Aerator Specification Sheet
Download 2D/3D Drawings